Project Rented Mule, Ridden Hard and Put Up Frozen

Axeon Optics line of scopes, this was certainly on my mind. Our product development team assured me that they had come up with a tough scope that delivered on features, price, and performance. Can a scope with an MSRP less than a new rifle possibly be any good?  Half the price? No way.  So when a diminutive Axeon Optics 2-7X32 scope landed on my desk one day, the wheels started turning.  Were the product guys right? Does this scope live up to their hype?  Alright then. I set out to see if I could accelerate the wear and tear a bit.  I wanted to push it harder than the average user would in a year, five years, a decade even.

I went beyond simply tossing the Axeon scope out onto the ground a few times.  Several premium optics makers have done this with their glass. I did throw it around, of course. Every time I took it off of my rifle, it was tossed into the woods where I was keeping it. Before I mounted it back onto the rifle there was usually a throw or two for good measure.  I bounced it off trees, tossed it high, tossed it far, hauled it around in the bed of my old truck.  The Axeon 2-7 just kept ticking.  Or rather, shooting good groups, adjusting properly, and remaining fog free.

I finally decided to give the scope a name: Project Rented Mule.  What else would be appropriate? I wasn’t even letting the scope sleep in my cozy gunsafe!  There was four months since I began the test and SHOT Show.  Of those four months the Project Rented Mule scope has been outside in the cold for 3/4ths of the time. Most of it was spent at the foot of the trees next to my house. We usually have one pretty decent cold snap here in Northwest Arkansas. This year’s cold snap dipped down to the single digits on the Fahrenheit scale. While out one cold evening devising a way to keep our dog’s water from freezing, I thought it might be good to freeze the scope in a pan.  The next day hauled the frozen pan to work, set up my camera and removed the scope from its icy tomb.  It wasn’t easy, but I did finally get the scope disinterred, mostly, from the ice. I let it thaw out in the bed for the rest of day.

One of my hobbies is dirt bike riding. As a result, I’ve made some great friends on two wheels (sometimes). One of those friends, JoJo Tool of A-Team Off Road Racing, said he’d like to strap Project Rented Mule to his Enduro bike for a race. As crazy as that sounds, and inspired by all the torture I’d already put the scope through, I said yes. Jojo took the scope to a cold race in Northwest Arkansas.  Endure race tracks are long, usually at least five miles long. Jojo and his dad secured the scope to the left side fork of the bike. This means it was “un-sprung”- or part of the suspension rather than cushioned by the suspension. He proceeded to make his way around the track on his first lap with the scope. It did fall off about halfway through that lap. About 100 motorcycles were racing that 22 degree morning.  I don’t know how many riders hit the Axeon scope, but it was part of the race course until one of his crew members was able to retrieve it.

I’ve not detailed every escapade and trial I put the scope through here, but the point, I think, has been made.  Honestly, after the dirt bike incident, I didn’t hold out too much hope for the scope. It was dented, dirty, and starting to show some signs of distress.  The zoom ring still turned smoothly, and the glass, while dirty on the outside, was not chipped or fogged, but cosmetically, the Project Rented Mule scope was starting to look like, well, a rented mule. After all of this was done, we took the scope to the range for verification. The first trip was with a pre-charged pneumatic air rifle. These rifles have virtually zero recoil and really make a mediocre marksman like myself really look good.  The scope put the pellets in nice, tight groups, but, that wasn’t satisfactory for me or for anyone else. We dusted off our AR15 carbine and located a few rounds of Hornady 55 grain hollowpoints to see if the airgun test was valid.  As it turned out, I was able to put five holes in a 1/2 inch group for the first target and 5 holes in a 3/8ths inch group for the second target.  This was at 25 yards and a GI spec trigger. I’ve never shot a better group with any rifle before.

Since then I’ve shot a few rounds through my .45-70 Marlin 1895G and re-zeroed the scope for that gun.  I have full confidence in this scope despite the miles I’ve put on it.  Like my 26 year old truck, it doesn’t look pretty, but it shows up for work every day. What this Axeon scope has done for me is increase my confidence in the scope and learn to be a better shooter. I cannot blame the scope for my inconsistencies. Even after all that I’ve done so far in testing, this scope has held up much better than I initially thought.  Yes, this Axeon scope has exceeded my expectations. While I’ve wrapped up the test, I will continue to shoot the Project Rented Mule Scope on my Marlin.

If you are going to the NRA Annual Meetings in Dallas, TX this year, look for the Project Rented Mule Scope at the Axeon Optics display. We’ll be glad to show off this “little scope that could.”

The Axeon® Absolute Zero

Axeon® Optics has released a crazy simple device that takes all of the guesswork and frustration out of sighting in a rifle. The Absolute Zero is comprised of two lasers that you attach to your scope while sighting it in. It works in as little as one shot. All of the headache is gone, and you will save time and money getting on target. I’ve had one to test out, and I’m impressed with its simplicity.

First, though, let’s define the necessity. Why do we need a new way to sight in?

If you have sighted in a rifle, you know what I mean by “walking it in.” That’s how I describe my process. I set up a target at 25 yards, brace my rifle, put the crosshairs on the bulls-eye and fire a shot. I then look back through the scope.

Next, comes the estimation and the clicking. I try to move the crosshairs to the bullet hole. This isn’t easy, as the rifle inevitably moves when I tweak the turrets. So then I line it up, fire again. Hopefully, the point of impact is closer to the bull’s-eye. Do it again.

Some rifles I can sight in with a minimal amount of firing and tweaking. Others, not so much. And shooting that many rounds can get expensive. As a gun writer, I’m often sighting in .45-70s, and .338 Lapuas, and even .50 BMGs. I hate wasting ammo on those.

Let’s begin with the promise of simplicity. The Absolute Zero is being advertised as the most foolproof way to sight in ever. All it takes is one shot at 25 yards. If you then want to zero at 100, you can fire another shot at 100 yards. How does the magic work?

The concept really is simple. First, think of a typical laser on a rifle or a handgun. The point of the laser on the target should approximate point of impact for the bullet. Many people rely on the concept for self-defense alone. But one laser is not terribly useful for sighting in a scope, as it won’t show if the rifle moves.

The Absolute Zero isn’t meant to stay on your rifle while you are shooting or hunting. It isn’t that kind of laser. Instead, it simplifies the sighting in process. The two lasers work with a third point of impact, your bullet’s hole in the target, to form three steady reference points.

It begins with the installation on the gun. Simply attach the laser unit to the tube of your scope.

The lasers will shine down range. The kit comes with a reference grid—a reflective strip that helps bounce back the refracted laser light, making it easier to see, even in sunlight.

You will need to orient the strip with your lasers. If they’re vertical on the scope, be sure your reflective grid is on the same side, and in the same orientation.

The grid is numbered. When you secure the rifle in a good shooting rest, or even on a sandbag, you will be able to position the lasers on the grid. Remember which numbered sections you are looking at.

Now look to the crosshairs. When everything is safe and clear down-range, fire one shot. Hold as steady as you can. Recoil will likely bounce the rifle up and you’ll lose the original placement on the grid. No worries. That’s why you have two lasers, and that’s why the grid is numbered.

Re-center. This is the part that is really much easier. Get the rifle set in the rest again, with the lasers on the same spots. If you are shooting off a bag, have a helper who can assist with dialing the scope. Watch the lasers. When they are set, dial your crosshairs to the bullet hole.

If you want to fire a proof shot at this point, you can. Ignore the lasers. Simply find a mark on the target and pull the trigger. You should be zeroed perfectly.

At 100 yards, this 25-yard zero will still be in the kill-zone of most North American game animals. For example, the 150 grain .308s I sighted in hit just over 3 inches high at 100 yards. Where I hunt in Arkansas, I rarely get sight distances over 200 yards, so that 25-yard zero would suffice.

If you want to be dead on at 100, move a target out to that distance and move back to the bench. Place the crosshairs on the bulls-eye, steady everything, and pull the trigger.

Your 25-yard shot takes care of the left/right up/down basics. The 100-yard shot, which is on a standard scale of Minute of Angle clicks on nearly every scope, will just require the simple raising of the crosshairs. It is entirely possible to be dead-on at 100 yards with only two shots fired.

I dialed the crosshairs up 12 clicks and fired a second shot and hit dead on.

Some helpful tips from practical experience.

Shoot a clean target. I’m a sucker for white poster board. It is stiff enough that the bullets punch, and large enough that I’m not going to miss, even with a gun with no sights. A nice clean target cuts down on the bullet holes.

Remember that you don’t need a bulls-eye at first; you sight into the hole you shoot. The less clutter on the paper, the better.

Keep things steady. Poor marksmanship is easy to hide at 25 yards. Take things out to 100 yards, though, and you will begin to separate those who know how to shoot from those who watch too many movies. Mind your trigger. Watch your breathing. Hold firm, but let the rifle move how it wants to. All of these basics translate into accuracy at 100 yards. And errors, even simple ones, will make you miss by a mile.

Look at your sunlight. Most gun ranges won’t let you turn around and shoot in the opposite direction. Keep in mind that lasers aren’t as easy to see in bright sunlight, or through scopes with no magnification. A spotting scope could be useful, too.  If not a spotting scope, try binoculars.

Get plenty of rest. A good bench rest is going to make this that much easier. I often shoot at a range that has lovely concrete benches and tables. They’re immovable objects. A lead sled on one of this is a fine option.

Don’t be afraid of the math. Know some basics. How high is your scope over your bore? That will change the holdover at 100, 200, etc. Be confident with the basics, like average drop rates at the big distances, and you’ll shoot much more confidently. Axeon® has actually done quite a bit of research for you in this department.  They have posted a ballistics chart on their website for many popular calibers and several popular loads in each caliber. This chart also accounts for scope bore axis height in the ballistics for those rounds.

If you don’t have that option, and many of us don’t, you just need to practice form even more carefully. Belly out with your rifle on a good sandbag, or on a stable duffel bag. Put a piece of protective foam on a rock if you have to. The ABSOLUTE ZERO is meant to be easy to use, and the dual laser reference points perfect that. But you have to hold the lasers steady until the bullet leaves the barrel, and then again when adjusting the scope.

The ways you can make it more complicated.

I’m going to be blunt. This is an amazingly accurate system. If you gave it to a robot, the process would be perfect. We are not robots.

The ABSOLUTE ZERO isn’t foolproof. We all know the fools I’m talking about. Human error will defeat this system, easily. Let’s take a look at how.

First, the mount has to be secure. The tube mount is easy enough to use, but don’t over-tighten it. But make sure that your Absolute Zero is tightened down like crazy on the pic mount. The scope has to be securely mounted on the rifle. And the rifle really does have to be steady during the scope calibration.

You should also be using ammunition with known ballistics. Be sure you have two of the same type of rounds on hand if you’re shooting at 100. And know what you like to shoot with. Your zero with light, low recoil .308 would not be the same if you switched to really hot hog-killing, hard-nosed bullets. Keep things consistent.

And, as always, play it safe. Keep your rifle unloaded while installing the Absolute Zero. These are lasers so don’t stare at them. And cut the unit off when you are finished. You should get more than 32 hours of run time, enough to sight in a battalion’s worth of rifles, but not if you don’t shut it down.

Axeon® is working on a polymer-based unit that will attach to a barrel. The unit I have, and the first on the market, has a zinc alloy body. While it is as solid as a tank, if it were mounted to the barrel, it could change the barrel harmonics on a thinner rifle barrel. The result could be a tweak in accuracy that you wouldn’t see when using the scope mounted AZ.

And a side note. You could also use the ABSOLUTE ZERO on a rifle with iron sights, especially at 25 yards. If you are working in an AR, or any rifle with modular sights, this could be an easy way to get on paper. Line up the gun in the rest as you usually would, line up your lasers on the reference grid, and fire a round.

David Higginbotham is a writer and educator who lives in Arkansas. After years of writing and consulting in the firearms industry, he's coming back to his roots with air guns.

« 2 of 14 »

Axeon® Optics Partners With TACOMHQ

FORT SMITH, Ark. — Umarex USA expands their Axeon® Optic Solutions™ product line with a revolutionary new way for shooters to hit their long distance targets. Axeon®’s new, patented Second Zero™ optical device will change the way hunters and AR shooters think about taking that 300+ yard shot.

Available in both rail-mounted versions for the MSR market and scope-mounted versions for the traditional hunting market, the Second Zero system allows any scope or optic to have two functional zeros with no manual manipulation of the reticle or red-dot. Utilizing a patented custom prism system, a rifle that is zeroed in at 100 yards can be on target at a second distance when the Second Zero system is engaged—without the need to compensate for bullet drop.

TACOMHQ and its president, longtime and highly respected optic developer, John Baker, have partnered with Umarex USA to bring the Second Zero to hunters and shooters worldwide. In addition to the stock Second Zero product line, TACOMHQ will continue to offer custom versions of the product to meet individual shooters’ needs through the TACOMHQ custom shop.

“We are excited about our partnership with Umarex USA. They have the strength to bring in sales and they’re well equipped in the areas of marketing, consumer understanding and distribution. Their new Axeon® product line will debut at SHOT Show 2017 (Shooting Hunting and Outdoor Trade Show) with the Second Zero system, an affordable and extremely usable tool for all hunters and tactical shooters,” said TACOMHQ President, John Baker.

“Our acquisition of these and other assets assures that Umarex USA’s Axeon® Optics brand will be a market leader through innovation,” said Richard Turner III, Umarex USA’s VP of Sales & Marketing. “We have tremendous respect for the innovation and commitment to performance that John and his TACOMHQ team have in developing optical products and we share these same approaches within Umarex.”

About Umarex USA
Umarex USA, Incorporated is one of North America’s fastest growing outdoor sport and recreation companies. Umarex USA innovates, develops and markets products under brands owned or licensed by its parent company, Umarex Sportwaffen GmbH & Co. KG. Such brands include Axeon® Optics, Beretta®, Browning®, Colt®, Elite Force®, Heckler & Koch®, Hornady®, IWI®, Optical Dynamics™, Ruger®, RWS®, Smith & Wesson®, Umarex®, Walther® and others. For additional information regarding Umarex USA visit Follow and subscribe to Umarex USA online: Facebook, Twitter, and YouTube.
Contact: Justin -JB- Biddle
Umarex USA, Inc.
7700 Chad Colley Boulevard
Fort Smith, Arkansas 72916

Second Zero Opens Up Long Range Possibilities

FORT SMITH, Ark. – Umarex USA once again makes news at the 38th annual SHOT Show being held at the Sands Expo Center in Las Vegas, NV January 17-20. Umarex is proud to debut the patented Second Zero system, under their new Axeon® Optics Solutions brand.

The Second Zero is a precision optical device that gives any rifle shooter an instant additional zero distance whether in hunting or tactical application. It works with all optical sights from rifle scopes to dot sights.

Shooters typically zero their rifles with one consistent load at a known distance. A 3x9 scope dialed in at 100 yards makes a .30-06 a versatile hunting tool. But what happens when a deer breaks through the hedgerow more than 300 yards out or you need to use your AR's red dot at that distance?

While some hunters are well versed in ballistics and bullet drop, many don't readily keep that information accessible or can recall in that short moment of "trophy opportunity". The Second Zero offers a simple solution that eliminates the need for hold-over. There's no complex math involved. Simply flip down the Second Zero precision lens, put the crosshairs on the deer, and pull the trigger.

The Second Zero, a patented prism driven optical device, will revolutionize the way shooters achieve accuracy at long distances. The system mounts forward of a traditional scope or other optic. Optics function normally when the Second Zero is not being used. When engaged, the prisms of the Second Zero, which can be selected based on a hunters specific round, shifts the image to compensate for bullet drop. Simply place the crosshairs on the target just as you would at 100 yards.

Each Axeon® Second Zero precision lens systems is regulated to a specific caliber and factory load. All common factory big game and tactical loads are covered and depending on the caliber, additional zero distances are available from 275 to 500 yards. Simply choose your caliber and mounting method to get started.

Mounting the Second Zero is simple. Attach it to the bell of a scope, or install it on available rail space in front of an optic on a MSR using the QD mount provided. The prismatic lens shifts the optical image without magnification, so the size of the target doesn't change. Because it shifts the target image optically (not mechanically) before a targeting device "sees" that image, the shift works when paired with any optic. Precision alignment is not required. The shooter sees the same image before and after the Second Zero is employed.

The Second Zero is the fastest way to compensate for bullet drop at extended range. In less time than it takes to read this sentence, and without looking away from the target, a shooter can instantly pull up the Second Zero.

The Second Zero was originally created and patented by John Baker, president of TACOMHQ in an exclusive development partnership of Umarex USA. This partnership will allow the Second Zero to be offered to hunters and tactical shooters worldwide. In addition to the stocked Second Zero product line, TACOMHQ will continue to be able to offer custom versions of the product individually specific to the shooters' needs though the TACOMHQ custom shop.

"We are extremely pleased to be partnered with Umarex in optical development of sighting devices and in particular, the introduction of the Second Zero product line" stated John Baker, President of TACOMHQ.

"Our acquisition of these and other assets assures that our Axeon® Optics brand will be a market leader through innovation." said Richard Turner III, VP of Sales & Marketing.

Follow Axeon® Optic Solutions on Facebook and Instagram to stay up-to-date with Axeon® Optic introductions.

About Umarex USA
Umarex USA, Incorporated is one of North America's fastest growing outdoor sport and recreation companies. Umarex USA innovates, develops and markets products under brands owned or licensed by its parent company, Umarex Sportwaffen GmbH & Co. KG. Such brands include Axeon® Optics, Beretta®, Browning®, Colt®, Elite Force®, Heckler & Koch®, Hornady®, IWI®, Optical Dynamics™, Ruger®, RWS®, Smith & Wesson®, Umarex®, Walther® and others. For additional information regarding Umarex USA visit Follow and subscribe to Umarex USA online: Facebook, Twitter, and YouTube.